Why is my garage door not closing? Causes and Solutions

Why is my garage door not closing? A garage door that won’t close is usually caused by something simple. However, it can be very frustrating when you can’t get your garage door to close. If you have ever experienced this problem, you’ll know how it feels and how much of an inconvenience it is. It’s almost always a slight problem with a straightforward solution.

Read on to find out the causes of why your garage door won’t close and their solutions.

Overloaded spring

Many garage door openers are designed to lift a specific amount of weight. If the door you try to close is too heavy, the torsion spring used to lift the door might be overloaded. In this case, you may need to adjust the spring or close the door slowly. This can be dangerous if you have a loaded spring on a garage door that doesn’t have a safety reverse. If you have an old garage door, it might be time to replace it with a new, lighter one.

Broken cables or chain

If your garage door has a chain or cable to open and close, it is essential to check if it is broken or detached. If the chain is broken or detached, it may cause a problem with closing the door. In the same way, if the chain is tangled or twisted, it can cause problems with the closing of the door. In this case, you can try to untangle or untwist it, but if this doesn’t solve the problem, you have to replace it with a new chain or cable.

Misaligned tracks

The tracks of your garage door are vital to closing the door. They guide the door so that it travels up and down smoothly. If the tracks are not aligned properly, then the door may not close by itself. The tracks might be bent or misaligned, or there might be debris or items that are preventing the tracks from moving the way they should. You may have to remove the obstruction and realign the tracks in this case. You can do this with the help of a friend.

Bad motor or opener

If the opener is new and functioning normally, but the door is still not closing, the problem might be with the motor. If the motor is not working or broken, it can’t push the door up to close. A motor can break down, overheat, have a power surge, or lose connection. If the motor is old and worn out, it might be time to replace it. Moreover, if there is a problem with the unit’s wiring, it can cause issues with the closing of the door. If there’s a problem with the motor’s circuit board, it can also be the reason behind the garage door malfunctioning.

You might wonder, “Why is my garage door not closing?” This can be an incredibly frustrating problem, but with this guide, you can quickly identify the cause and find a solution to the problem. If you experience further problems, you can call an emergency garage door service and get a professional to assist you.