What Should You Do If Your Hoverboard Doesn’t Turn on?

If you have a hoverboard, you obviously love it and take care of it but machines are machines in the end and they can stop working at some point. What would you do if your hoverboard doesn’t turn on one day and it leaves you perturbed? You would think of buying a new one but it should be the last resort because hoverboard problems have viable solutions that you can try. If you want to read in more detail, just visit ecohoverboard.com.  

Your hoverboard might have these problems but there are other possibilities too:

●     Battery Issues

●     Charger Issues

●     Wiring Issues

●     The hoverboard is defective altogether

●     Motherboard Issues

Battery Issues

How would you check if it’s a battery issue? With your hoverboard and the charger connected, check if the green indicator stays green. You can turn on the hoverboard, see if the hoverboard starts flashing orange on the battery indicator, which means the battery is behaving abnormally. It’s time to replace the battery.

Moreover, a hoverboard doesn’t turn on or charge if the battery is depleted. The battery’s BMS is detecting too much amperage in the process of charging. To drill it deeply, use the screwdriver to remove the battery, undo a wire that connects the lights. When you see the battery is out, you can use a voltage meter at the end of the battery’s terminals. If you find that the voltage is less than 36, it’s too low to charge on its own. On the other hand, if it’s high than 36, it’s an error with the BMS (battery management system). Take your battery for the repairs in this case!

Charger Problems

Here is the process of detecting a charging problem: connect your charger to the wall and check if you can see a green indicator light, now connect your hoverboard with the charger. The light will be red for a while even if the battery is full, wait for it to turn green. If it doesn’t turn red at the start, your charger is defective.

Wiring Issues

When you’re done with the battery and charging, you might confront a wiring problem because it’s common. To analyze this issue, remove the cover and have a look at the wiring, do you see any damage or frays? You have to pay close attention to the wiring of the charger port and its connection to the motherboard. You have to unplug it and then plug it back in; try charging your hoverboard now and turn it on.

Malfunctioning Motherboard

If the above-mentioned reasons are not the cause of your despondency and distress, then your motherboard might be the reason. You can’t really pick out what’s wrong with the motherboard but it’s just a process of elimination. What you can do? Get it replaced by the company you bought it from as you don’t have to get rid of the whole hoverboard.

Defective Hoverboard

If you feel lost at sea and you are unable to make up your mind about the precise issue, you should know that the hoverboard is conked out. Something went terribly wrong during the manufacturing process and no troubleshooting will solve it. You should go online, do your adequate search and see if you can find something about faulty parts. On top of that, you can call the company and talk to customer service. There are chances that you will get a refund but it depends on the company policy. Whether you are going to buy a hoverboard under 200 or 500, you just have to do some good research about the model and company that you are going to choose.