Tools an electrician needs for an electrical installation

An electrician needs a very specific set of tools to do his job. The trades industry requires a high level of expertise with tools, whether you are a plasterer, plumber or carpenter. The selection of tools required differs across the various specialities. High-quality tools can help to work efficiently and produce better results. 

Skill and knowledge can only get you so far as a tradesperson; you need the power tools to do the bulk of the labour according to the professionals from Amped Electrical. Basic tools also come in handy for smaller jobs like measuring a space or making sure a surface is level. Professional tradespeople need professional-grade equipment to carry out their work. If you are starting a career as an electrician, here are the tools you need in your kit.

The stripper

A pair of wire strippers can be used to cut and strip insulation from electrician wires. The tool has a row of holes for stripping wires of various sizes and cutting jaws for tripping the ends. It’s one of the most important tools in your kit – and one that you will use time and time again.

Cutting pliers

There are numerous types of pliers available. Cutting pliers have a cutting blade on the side of their jaws to cut wire. If you need to cut wires that have already been installed in a confined space, get yourself a pair of diagonal cutting pliers. The cutting edge is offset by 15 degrees so they can cut objects already pinned to the surface.  

Screwdrivers

Every tradesperson needs a set of screwdrivers. Electricians can use them to remove or install cover plates, switches, and outlets. Aim to find a screwdriver with an insulating rubber cover to make them a little safer. 

Utility knives

 A utility knife can be used for all kinds of jobs, from slicing open a cardboard box to cutting electrical tape. Trust me; this one will come in handy all the time. 

Multimeter

A multimeter is an electrician’s best friend. You can use this to measure electrical properties, such as voltage, resistance and current. You will need to learn how to use this device and what the different numbers mean. 

 Voltage tester

You need a voltage test to conduct quick safety checks on electrical wires and devices. Before you can begin cutting wires and managing an electrical system, you need to ensure there is no voltage in the wire. Remember, safety is paramount with electrical installation. 

Antistatic gloves

Antistatic gloves protect you from electrostatic build-up. They are an essential piece of personal protective equipment for electricians and can keep you safe when working with electrical systems.

Protective goggles

Finally, get yourself some protective goggles for using power tools and working with electrical hazards. You may need a face shield in some cases.

Kit yourself out with the essential tools needed to install an electrical system.