Netgear Router Red Light Issue? Here’s What To Do!

The status of various LEDs on your Netgear router indicates its overall performance. Most of the times, you may not see stable LEDs on your Netgear router. But, what if your Netgear router keeps on showing red LED? Well, don’t sweat over it! Getting the red light issue on the device is one of the most common issues faced by every 2^nd Netgear router user across the globe. To get it fixed, try the proven tips highlighted below. We assure you that if you follow and apply the troubleshooting tips given in this post in exact given order, you will surely fix the issue on your own. Let’s dive in, shall we?

Instructions to Fix Red Light Issue on Your Netgear Router

1. Check the Power

The very first thing that you need to check is the power that is being supplied to your Netgear router. Then, you have to ensure that the wall plug you have used for your Netgear router is in working condition.

2. Check the Cable Connections

Bear in mind, loose or faulty cable connections can also let you experience red light issue on your Netgear router. So, to fix this, ensure to connect your Netgear router and modem properly with each other using a Well-maintained and non-damaged Ethernet cable. Once done, try to access routerlogin net web-based setup page on your PC or laptop.

On the off chance if even after following the troubleshooting tips listed above you are still failed to resolve the red light issue with your Netgear router, don’t sweat over it. We’ve some advanced and effective troubleshooting tips for you. Allow us to present them before you.

3. Reboot Your Netgear Router

Yes, you read it right! This troubleshooting tip is enough to fix various issues related to your Netgear router. To reboot your Netgear router, unplug your Netgear router from its respective wall outlet. Let your Netgear router and its power adapter have some rest. Then, again plug your Netgear router back in and see if the red light issue has been resolved or not.

4. Opt For Wireless Connection

In the event that you have connected your Netgear router and modem with each other using an Ethernet cable, consider disconnecting them. Once you’re done, connect your devices in a wireless manner. Sometimes, disruption or fault in the cable connection can also result in the red light issue.

5. Cross-Check with Your Service Provider

Contact your service provider to know whether everything is fine from their end. Chances are that you are getting red light issue on your Netgear router due to a technical glitch from your ISP end. Apart from that, ask your ISP a couple of things:

• All your internet bills must be clear
• The device provided by your ISP must be up-to-date
• You are on an upgraded data plan with best Gigabits speed

Bonus Tip: Once you fix red LED issue on your Netgear router, we suggest you add a Netgear WiFi range extender to your router and get rid of the device provided by your ISP. Yes, Netgear extender is the device that will provide you a blazing-fast internet speed even in dead zones of your house. Simply set it up by following the instructions provided on mywifiext setup page and see the difference.

Still Facing the Red Light Issue on Your Netgear Router?

If you are still getting red light issue on your Netgear router, don’t panic. Simply reset your Netgear router back to the default factory settings to get the issue fixed.

To reset your Netgear router, follow the step-by-step instructions provided below:

Step 1: Unplug your Netgear router and disconnect it from your modem and WiFi-enabled devices.

Step 2: Once you’re done, locate and push the Netgear router reset hole.

Step 3: Keep holding the reset hole for a couple of seconds and release it.

Step 4: The power LED on your Netgear router will start blinking. As soon as the Netgear router’s become stable, navigate to the setup wizard using 192.168.1.1 IP and set it up again.

Feel free to contact our technical experts anytime, if you are still unable to fix the issue.