How To Remodel A Bathroom

The easiest way to spruce up your home is by performing a complete bathroom makeover. You should renovate your bathroom when you have breaks and leaks, and poor lighting. Remodeling is also necessary when you aim to sell the house or when there is a lack of storage and space. While a bathroom renovation might be costly, it is a worthwhile project. 

The best way to kick off this project is by planning properly and consider aesthetic upgrades that will match your lifestyle. You can also plan out your Tenafly bathroom remodeling to fully understand what the project will entail.

How much Does a Bathroom Renovation Cost?

When it comes to bathroom remodeling, expect to pay between $10000 and $15,000  and 20% of this in terms of labor cost. The best way to save is, therefore, to handle the project yourself. Want to know how to renovate a bathroom? Explore the following steps so you can figure out the best way to handle the project.

1. Plan Your Renovation Project Well

Before you even contact a company to help you out, you should start by consulting everyone who will use the bathroom. Discuss the finishes and fixtures you want to install and how much cash you are willing to spend. 

As you make your budget, set aside some little extras. This is because there could be some issues that will increase the remodeling cost of the bathroom.

Planning is not only effective but also helps you maintain your bathroom renovation plan. Regardless of how long the project takes, do not change the plan unless problems arise or you are faced with financial constraints.

1. Gather the Tools

Outside your tool collection, the additional tools you need usually vary on your remodeling plan. The few essential tools include gloves, safety mask, tape measure, spackle knife, power drill, adjustable wrench, chalk line, and extension cord. Make sure you have assembled all these items as soon as you start the project.

1. Demolition of the Bathroom

If you are totally renovating the bathroom, start by removing any fixtures of drywall you are replacing. While renovating a bathroom is not difficult, you should follow specific steps to avoid any costly mistakes.

Whether you want to do a major or minor remodeling project, demolition of fixtures is necessary. You should therefore

• Remove the towel bar and empty the cabinets
• Drain the water from the fixtures and stop the power supply
• Removes any fixtures. These include faucets, tub, toilet, sink, and the tile or wall behind the shower or tub.
• Remove the flooring and baseboard if need be

1. Redesign the Bathroom

Depending on the number of tubs, showers, or sinks, you should redesign your bathroom. For instance, most people prefer an extra sink, especially if they are in a family where more than one person uses the bathroom.  

If you are remodeling a master bathroom,  consider the space you need for two vanities, two sinks, and two cabinets. The best way to go about it is to think beyond the space and know the layout that would match your design.

1. Consider Storage

Since storage is limited in most bathrooms, consider installing a built-in shower. You can buy a precast niche or just put one between the studs. However, ensure it’s big enough to carry all your bathroom products. You should also choose a vanity that will work with your original plan and budget.

1. Install a New Shower and Tub Basin

After you’ve done the demolition, it’s time to start installing fixtures. For tub or shower replacement, you’ll want to pick a basin or tub that fits your new decor and the space you want to install it. When it comes to shapes, you can choose rectangular, square, or pentangle space.

Since the shape determines your layout, consider all the other features, including the door location. If you have enough space, consider installing a bathtub and shower in one place.

1. Install New Fixtures

Once you are done with the shower, install new lighting and configure electrical fixtures. If they are smaller, adjust the wiring so you can renovate the bathroom further. 

This means moving GFCIs and other outlets so that they can match your new cabinets and vanity. If you’ve never done this work before, call in an electrician to help you out.

1. Add the Right Bells

If you want to boost the value of your house for resale, choose trends that suit your lifestyle. Some things to consider include smart showers, non-slip flooring, drawer chargers, body jets, and heated floors.

1. Hang a New Drywall and Paint

Next, you need to hang your new drywall. Because you have to cut the new wall to fit well, this can be a long process. But once you start nailing the boards, you should be able to move fast. 

After you’ve hung your drywall, start painting the bathroom. Painting is not only cost-effective but also the easiest way to give your bathroom a fresh new look.

1. Finish Up

At this point, you’ve already done everything except the toilet, which you can install easily. However, you should do this towards the end of your project to avoid chipping other newly installed areas. 

Just like other home improvement projects, bathroom renovation is an investment. Therefore you want to be sure you are getting the best results. By investing in your bathroom, you’ll improve the value of your house, boost your lifestyle, and stay in a clean environment.